BWP

USGA article by our own Derek Nees

Preventative maintenance can prolong the life and efficiency of the pumps. The good news is that pump station failure is usually avoidable – or if not avoidable, at least failure can be forecasted.

When a water supply well has been affected by flood waters, the water within the well may be contaminated with bacteria or other microorganisms that can cause serious illness in humans and pets.
  • Featured Post
  • Water well maintenance during floods

    When a water supply well has been affected by flood waters, the water within the well may be contaminated with bacteria or other microorganisms that can cause serious illness in humans and pets.

    Municipal Water Supply Resilience
  • Featured Post
  • Municipal water supply resilience

    Tools to achieve municipal water supply resilience

    EPA’s Climate Ready Water Utilities Program

    As temperatures warm, changes in the water cycle will challenge the reliability of water supplies in some areas. Optimizing the use of supplies from different sources while meeting water-quality standards is crucial to success.

    Earth’s oceans and atmosphere are warming. Scientists project that subsequent changes in the water cycle will challenge the reliability of water supplies in some areas. Changes in the amount of precipitation that falls as rain versus snow and earlier spring snowmelt are among the climate-related changes likely to affect the quality and quantity of some water supplies. Non-climate factors such as increased demand from growing populations and aging infrastructure can compound these issues, threatening the ample supply of clean, safe water and reliable wastewater services many Americans take for granted.

    To ensure uninterrupted future services, water managers must make infrastructure decisions sooner than later. Decisions to build reservoirs, purchase desalination equipment or increase capacity to manage stormwater or wastewater can take a decade or more to implement plus remain viable for decades into the future.

    Climate Resilience Evaluation and Awareness Tool (CREAT) Case Study : Fredericktown, Missouri

    https://toolkit.climate.gov/case-studies/addressing-short-and-long-term-risks-water-supply

    Resiliency appears to be key to developing a more trustworthy water supply and sanitation system. A 2017 Canadian policy brief highlights best practices:

    https://www.iisd.org/library/building-climate-resilient-city-water-supply-and-sanitation-systems

    Key message from that brief include:

    • Building and maintaining a water supply system resilient to climate shocks requires “multi-barrier” methods that strengthen all infrastructure components.
    • Redundancy in water supply should be a policy priority with the flexibility to shift between surface and groundwater options.
    • Highly decentralized water supply and sanitation options are now feasible; they provide resilience and complement centralized systems.
    • Water conservation and green infrastructure options for stormwater management are proven approaches for reducing climate risks.

    The EPS’s Route to Resilience (RtoR) Tool can be of benefit to water managers, too. It uses brief videos and an easy to navigate interface to guide users through the process of building their own unique Roadmap to Resilience report. The RtoR presents five stops to resiliency:

    • Assess
    • Plan
    • Train
    • Respond
    • Recover
    Get started here:

    https://www.epa.gov/waterresilience/route-resilience-2018-drinking-water-and-wastewater-utilities

    Sources:

    https://www.iisd.org

    https://www.epa.gov

    https://toolkit.climate.gov

    Excerpted and adapted from the report Climate Change Impacts in the United States: The Third National Climate Assessment (Chapter 2: Our Changing Climate and Chapter 3: Water Resources) and the Water Resources/Climate Impacts and Adaptation Examples webpage published by the U.S. Environmental Protection Agency.

    pump repair

    Machining Excellence

    Brotcke Well & Pump’s machine shop is located at our Fenton office. Complete machine shop services are available to ensure timely and professional repair of both vertical turbine and horizontal pumps. Specialized components or standard pump parts can be fabricated to reduce downtime. BWP has a Schenck Horizontal Balancing Machine to complement our machine shop equipment. The Schenck equipment provides high tolerance balancing capabilities for rotating pump components. Our experienced technical staff and full array of equipment results in re-installations with tolerances greater than factory specifications.

    Most repairs have tolerances greater than factory specification. If that is not enough, let us know what you require.

    BWP, INC. | EXPERT WATER WELL & PUMP SERVICES

    • Hydro-geologic Design Services
    • Water Well Installation
    • Water Well Rehab
    • Pump Sales & Installation
    • Complete Pump Service and Repair
    • In-house Machine Shop Services
    • Geotechnical & Environmental Drilling
    • Direct Push Services

    Geotechnical Drilling

    Brotcke Well & Pump, Inc., (BWP) is a full-service, geotechnical and environmental drilling contractor incorporated in 1983. Our employees are trained to advance bore holes through overburden using both hollow steam augers and mud rotary drilling techniques. Their extensive experience with rock coring and other sampling methods (such as split spoons, shelby tubes, continuous samplers and piston samplers) assures our clients results. We have a complete array of drilling equipment to best serve our clients. Our equipment includes auger drilling rigs complemented with various sizes of drilling tools, steam cleaners, support trailers, service trucks, mobile cranes, decontamination equipment, protective clothing and safety equipment.

     

    geotechnical drilling

    Our core set of geotechnical and environmental drilling services include:

    • Geotechnical exploration including soil drilling, rock coring, standard split spoon sampling, thin wall Shelby tube sampling and piezometer installation.
    • Environmental exploration including drilling and installation of groundwater monitoring wells, monitoring well decommissioning, environmental drilling and sampling.
    • Our in-house laboratory is capable of performing a limited range of testing, such as visual soils and rock classification, gradation analysis and moisture contents.
    • Full aquifer testing and groundwater quality testing.
    • Borehole geophysical logging services
    • In-situ testing services
    • Installation of vibrating wire piezometers

     

     

    BWP, INC. | EXPERT WATER WELL & PUMP SERVICES

    • Hydro-geologic Design Services
    • Water Well Installation
    • Water Well Rehab
    • Pump Sales & Installation
    • Complete Pump Service and Repair
    • In-house Machine Shop Services
    • Geotechnical & Environmental Drilling
    • Direct Push Services

     

    direct push drilling

    Direct Push Drilling

    BWP has a GEOPROBE 6610DTX. This versatile, track-mounted unit allows our crews access to almost any location. Speed and versatility is a key to quickly collect soil and gas samples allowing you to make better, well-informed decisions. BWP has tooling to extend sampling to any requested depth.

    BWP, INC. | EXPERT WATER WELL & PUMP SERVICES

    • Hydro-geologic Design Services
    • Water Well Installation
    • Water Well Rehab
    • Pump Sales & Installation
    • Complete Pump Service and Repair
    • In-house Machine Shop Services
    • Geotechnical & Environmental Drilling
    • Direct Push Services

    Water Well Design

    Brotcke Well & Pump Company, Inc., (BWP) is a full service design-construct, municipal and industrial water well and pump service contractor. For over 30 years, BWP has been providing water-related engineering and construction services to clients throughout the Midwest.

     

    BWP performs design-construct services ranging from complete hydrologic engineering investigations to locate new water supply aquifers to the selection of water well rehabilitation procedures. We have installed both alluvial and consolidated water wells from small capacity wells to installations over 3200 GPM. We specialize in alluvial gravel wall wells with outside diameters ranging from 20 to 60 inches. When required, double gravel wall wells have been recommended and installed to provide an effective filter for very fine sand formations. Dependent on the requirements, both direct rotary and reverse rotary drilling techniques are utilized.Well design is based on intended use, desired capacity and the aquifer’s hydrologic properties.

     

    One or more test borings are required to define the aquifer at the desired well location. Gradation tests of representative samples allow selection of well screen slot size and gravel pack. The right well screen coupled with the proper gravel pack results in a highly efficient, sand free well – our project goal.

     

    well construction

    Well screens and casing ranging from 8″ to 36″ are commonly used with bore hole diameters ranging from 24″ to 60″.

    BWP specializes in reverse circulation drilling – the preferred method in unconsolidated formations because it minimizes drilling fluid additives, assuring a high-efficiency well.

    BWP, INC. | EXPERT WATER WELL & PUMP SERVICES

    • Hydro-geologic Design Services
    • Water Well Installation
    • Water Well Rehab
    • Pump Sales & Installation
    • Complete Pump Service and Repair
    • In-house Machine Shop Services
    • Geotechnical & Environmental Drilling
    • Direct Push Services
    pump repair

    Water Supply Pumps

    BWP is a full service sales and repair facility.

    Our experienced technicians completely disassemble all units, inspecting and repairing parts on an as-needed basis to restore the unit to a like-new condition. Specialized components or standard pump parts can be fabricated in our custom machine shop to reduce downtime. Complete machine shop services are available to ensure timely and professional repair of both Vertical Turbine and Horizontal Pumps. Our re-installations have tolerances greater than factory requirements.

    For new installations, our engineers work with your design team to select the pump that fits your specifications. Specialized components and standard pump parts can be fabricated in our custom machine shop. Most often, an existing pump can be rebuilt to a “like new” condition in our on-site machine shop.

    pump service and repair

    We know pump maintenance and repair are critical to your operation. Downtime reduces productivity, quality of output and can create inconvenience with the general populace. We won’t let that happen to you. BWP services most makes and models, including:

    • water pumps
    • turbine pumps
    • irrigation pumps
    • blowers
    • gear boxes
    • compressors
    • cooling tower pumps

    All repaired pumps have tolerances greater than factory specification. If that is not enough, let us know what you require.

    BWP, INC. | EXPERT WATER WELL & PUMP SERVICES

    • Hydro-geologic Design Services
    • Water Well Installation
    • Water Well Rehab
    • Pump Sales & Installation
    • Complete Pump Service and Repair
    • In-house Machine Shop Services
    • Geotechnical & Environmental Drilling
    • Direct Push Services

    Hydrological Investigation

    Engineering water wells begins with a thorough understanding of the aquifer. Test holes are necessary to determine the aquifers integrity and locate an acceptable location for the new well. A location which has the following properties is highly desirable:

    • Saturated Thickness – High
    • Relative Density – Low
    • Coarseness of the Sand – High
    • Amount of Fines in the STRATUM – Low

    From a single well to an entire field – BWP’s capabilities and track record speak for themselves. We provide our clients the data and analysis that allows them to make confident decisions.

    well construction

    A Hydrologic Engineering Study is approached as a multi-phase project at Brotcke Well & Pump, Inc. While there can be many variations from project to project, our approach is as follows:

    • PHASE 1 Test Boring Program
    • PHASE 2 Laboratory Sieve Analysis
    • PHASE 3 Test Well Construction and Pump Testing
    • PHASE 4 Engineering Analysis and Report

    BWP, INC. | EXPERT WATER WELL & PUMP SERVICES

    • Hydro-geologic Design Services
    • Water Well Installation
    • Water Well Rehab
    • Pump Sales & Installation
    • Complete Pump Service and Repair
    • In-house Machine Shop Services
    • Geotechnical & Environmental Drilling
    • Direct Push Services
    airshock

    Airshock

    The AirShock® Impulse Generator (AIG) is the latest, environmentally-safe water well rehabilitation process. It uses bursts of compressed gas to remove build-up from well screens, gravel packs and surrounding aquifers. It provides a “green” alternative to water well rehabilitation and development because it uses fewer (if any) chemical additives.

    direct push

    GREEN TECHNOLOGY

    AIG fires automatically once every 2-3 seconds and each burst lasts just several dozens of milliseconds. Resulting shock waves and powerful water surges, produced by this process, successfully remove incrustation in the well screen, gravel pack and surrounding aquifer. In a very short time, a well is completely restored to the highest level of efficiency. The method is unique both in success and ease of setup and operation.

    80 – 120% WATER WELL RESTORATION

    Logo_Airshock
    AIRSHOCK® Impulse Generator is:

    • Safe, environmentally friendly
    • Highly effective for both screened and open wells
    • Relatively short procedure of a few hours
    • Well downtime 1-2 days only
    • Used independently or in combination with chemicals
    • Reliable equipment with negligible maintenance through years
    • Contractor-owned

    BWP, INC. | EXPERT WATER WELL & PUMP SERVICES

    • Hydro-geologic Design Services
    • Water Well Installation
    • Water Well Rehab
    • Pump Sales & Installation
    • Complete Pump Service and Repair
    • In-house Machine Shop Services
    • Geotechnical & Environmental Drilling
    • Direct Push Services